SYSTEM7 MECHANICAL ROOM CONTROL DEVICE (MRC)
The System7 Mechanical Room Controller (MRC) controls the operation of all mechanical, electrical and water chemistry control devices used in the conditioning and treatment of your aquatic facility's water. The MRC can report data in either US (English) or metric measurements.
COMPLETE MECHANICAL ROOM MANAGER
The System7 MRC controls all of the following equipment:
- Main recirculation pump
- Flow and volume instruments
- All filter functions
- pH and disinfection feed
- Chemical storage tanks
- Surge and balance tanks
- Backwash sump levels
ON-BOARD LOGGING
The MRC logs as many as twenty days of your system's data.
- Surge/ balance tank levels
- Vacuum at pump strainer
- Filter system pressures
- Differential pressure
- Turbidity
- Temperature
- pH values
- HRR values
- All alarm conditions
- All set point adjustments
- Feed event cycles
- Filter event history
- Operator access
ENERGY CONSCIOUS
In the "energy conservation mode", the MRC can be programmed to shut down all mechanical and chemical events. While in this mode, it will continue to periodically monitor critical operational requirements, such as disinfection, and satisfy these as needed. It then resumes "energy conservation mode" once these critical tasks are completed.
COMMUNICATIONS
The System7 MRC comes complete with a high speed modem. You can communicate with the MRC on a real- time or archival basis to retrieve operational data, start/ stop mechanical equipment or make set point adjustments via telephone or non-dedicated computer. The MRC will communicate alarm conditions to you via remote computer, telephone, pager or fax - your choice.
WinSys Windows- based software is included with the System7 MRC. This software allows you access to all data and events logged in the MRC. You can even plot the data in graphical format for easy review of your system's operation.
SECURITY
Only authorized operators are allowed access to the controller functions. The MRC has two separate manager codes and six operator codes. All codes can be changed to accommodate changes in personnel. All controller access is logged onto the MRC.
pdf data sheet
|
CESWaterQualityNews